BSYW160F Cylindrical Worm Gear Reducer / Gear Transmission with Neutral Gear

Specifications

1. Compact dimension, light-weight 

2. Large carrying capacity 

3. Stable operation, low noise 

4. Reasonable price

Product Description

1. Characteristics

A. The gear is made of high strength low carbon alloy steel through carburization and quenching. The hardness of tooth surface may reach to HRC58-62. All gear adapts NC tooth grinding process, high in accuracy and good in contact performance; 

B. High in transmission efficiency: Single stage, more than 96.5%; Double-stage, more than 93%; Three-stage, more 90%; 

C. Smooth and stable in run, low noise; 

D. Compact, light, long life, high bearing capacity; 

E. Easy to disassemble, inspect and assemble. 

2. Main Technical Parameter

A. Three gears speed reduction ratio:

No1. 58.03, 119.11, 244.49;

No2. 42.02, 86.26, 177.06.

Neutral clutch is between output shaft & worm gears.

B. More reduction ratio could be realized by exchanging first stage gear paremeter, selection gear No ratio:17/69, 18/53, 18/67, 23/62, 21/52, 22/49, 19/66, 19/59, 24/61, 21/50.

C. Transmission type: cylindrical gear -small modulus worm gear & worm shaft transmission, shifting gears by sliping.

D. Mounting type: torque arm.

3. Brief Product Introduction

This product is an outer meshed involute helical tooth cylindrical gear speed reducer. 
It is widely applied to the fields of metallurgy, mines, hoisting, transportation, cement, architecture, chemical, textile, printing and dyeing, pharmaceutical, etc. 
The suitable scope of speed reducer is as follows: 

A. The temperature of work environment should be -40-45 egree celsius. If below 0 degree celsius, before start, the lubricating oil should be pre-heated to above 0 gree celsius. This speed reducer can be run at clockwise and counterclockwise direction.

B. The rotation of high speed shaft should not be more than 1500rpm; 

C. The circumferential velocity of gear transmission should not be more than 20, /sec; 

3. Company Profile & Workshop Corner Show

Changzhou Mingdi Machinery Co., Ltd is a professional transmission machinery manufacturer of
 producing various gears, gear transmission and reducers, the hardened-tooth-surface cylindrical gearbox that is our featured product is widely used in four fields, among which
 are electrical machinery, plastic extrusion machinery, railway engineering machinery and metallurgical 
machinery industry.

Application Scope

Applicable for the industries such as metallurgy, mine, chemical industry, construction materials, hoisting, 
transportation, textile, paper marking, food, plastic, rubber, engineering machinery, and energy industry.

Our Competitive Advantages
 
1. We ensure we will make immediate response on your enquires and any queries in 12 hours

2. Ability to produce customerized products as request.

3. Complete processing & testing equipment.

4. Quality is our culture; quality is the soul of enterprise.

5. Competitive price: we can give you an edge over your competitor.

Picture Show for Part Drawing

.